How To Use Your Powered Voicing Tool
This page is a free resource for people to understand the best ways to implement the powered voicing tool into their everyday use tools
Setting Up your Cordless Unit
To use the device in cordless mode, take the battery and the tool out of the pouch and attach the battery’s rca style plug to the back of the tool. Long press the power button to turn on the battery and then short press the power button to activate the tool. Use the plus and minus buttons to control the voltage. I tend to use the tool between 10-12 volts. If I desire a less aggressive effect I will adjust the depth of the tool more so than the voltage.
Setting Up Your Corded Unit
​
To use the device in the corded mode remove the power supply, the foot pedal, the ac power cord and the dc power cord from the pouch. Attach the ac power cord to the back of the power supply and the other end into the wall. The foot pedal and the dc power cable plug into the front of the power supply. The power knob should be set between 75% and 100% , similar to the battery. Step on the foot pedal to activate the tool.
Changing Cartridges
Changing and installing the cartridges is simple. Take your desired cartridge out of the pouch push it into the top of tool and twist. To remove the cartridge , twist the cartridge and pull up. It Is that simple.
Setting The Depth of the Needles
Setting the depth of the tool is the main way of determining how aggressive the effects of the voicing are, rotating the collette counter clockwise makes it so the needles penetrate shallower, and rotating the collette clockwise will set the depth deeper. 6mm is the maximum